Sheet

Hot Roll Commercial Steel – A 1011 CS Type B (CQ)

This specification covers hot-rolled carbon steel sheets of commercial quality, in coils and cut lengths, having a maximum carbon of 0.15%. This material is intended for parts where bending, moderate forming or drawing, and welding may be involved. This specification is not intended for structural use.

Available conditions: Hot Roll or Hot Roll Pickled & Oil

View Catalog

ASTM A36

ASTM A36 is a structural quality carbon steel for use in welded, bolted or riveted construction of bridges and buildings, and for general structural purposes. Minimum yield strength of 36 KSI (250MPa) is required to meet the requirements of A36. ASTM A36 plate is used in a variety of applications which include, but not limited to; railroad cars, trucks, agriculture equipment, trailers, construction equipment, buildings and bridges

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Mechanical Properties:

YP (MPa), min.Tensile (MPa), min.Elongation in 2" (50mm), min. %Carbon Max % (thickness dependent)
36 (250)58-80 (400-550)23.25-.29
View Catalog

A 1011-F HSLAS Gr50/Gr60/Gr80

This specification covers sheet hot-rolled, carbon, structural, high-strength low-alloy with improved formability, and strip, in coils and cut lengths. The addition of alloying elements raises the yield point offering higher strength-to-weight ratios. The product is intended for applications where higher strength, savings in weight, improved formability and weldability are important.

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Mechanical Properties:

YP (MPa), min.Tensile (MPa), min.Elongation in 2" (50mm), min. %
50 (345), 60 (415), 80 (550)60 (410), 70 (480), 90 (620)22, 20, 16
View Catalog

A1018 HSLAS-F Gr50

This specification covers heavy gauge hot-rolled, carbon, structural, high-strength low-alloy with improved formability, and strip, in coils and cut lengths. The product is intended for applications where higher strength, savings in weight, improved formability and weldability are important.

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Mechanical Properties:

YP (MPa), min.Tensile (MPa), min.Elongation in 2" (50mm), min. %
50 (345)60 (410)22
View Catalog

ASTM A572 Gr50/Gr60

A572 is a high strength low alloy steel that offers a higher strength than plain carbon steel plates – plus ductility, weldability, formability, toughness and fatigue strength. A572 meets a minimum strength requirement (dependent on grade) and provides good workability and weldability at a moderate price. A572 plate is used in a variety of applications which include, but not limited to; railroad cars, trucks, trailers, agriculture equipment, construction equipment, buildings and bridges. Charpy V-notch Impact Toughness and Maximum Tensile Strength are supplementary requirements that may be requested.

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Mechanical Properties:

YP (MPa), min.Tensile (MPa), min.Elongation in 2" (50mm), min. %
50 (345), 60 (415)65 (450), 75 (520)21, 18
View Catalog

A656 Gr80

This specification covers high-strength low-alloy, hot rolled structural steel plate for use in truck frames, brackets, crane booms, rail cars, and similar applications. Steels that conform to this specification offer improved formability. These steels are normally furnished in the as-rolled condition.

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Mechanical Properties:

YP (MPa), min.Tensile (MPa), min.Elongation in 2" (50mm), min. %
80 (550)90 (620)15
View Catalog

AR200

AR200 is an as-rolled, carbon-steel plate with a nominal hardness of between 180-235 HBW, intended for moderate wear applications. AR200 is available as cut-to-length plate and discrete plate. AR200 is not intended for structural applications. Typical applications for AR200 steel plate include cement mixer drums and fins, bulk material handling chute liners, skirt board liners, and screw conveyors.

View Catalog

Floor Plate (A786 – CS And A36)

This specification covers carbon, low-alloy, high strength low-alloy, and alloy steel hot-rolled floor plates for flooring, stairways, transportation equipment, and general structural purposes. While it is generally provided in the as-rolled condition, floor plate also may be provided in the heat-treated condition, depending on the material specification. Rolled floor plates have raised figures at regular intervals on one surface of the plate.

View Catalog

A1008 CS Type B

This specification covers cold-rolled, carbon steel sheet, in coils and cut lengths. This material is intended for parts where bending, moderate forming or drawing, and welding may be involved. This specification is not intended for structural use.

View Catalog

Galvanized – A653 – CS Type B

This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hotdip process in coils and cut lengths.

View Catalog

Hot Roll Commercial Steel – A 1011 CS Type B (CQ)

This specification covers hot-rolled carbon steel sheets of commercial quality, in coils and cut lengths, having a maximum carbon of 0.15%. This material is intended for parts where bending, moderate forming or drawing, and welding may be involved. This specification is not intended for structural use.

Available conditions: Hot Roll or Hot Roll Pickled & Oil

View Catalog

ASTM A36

ASTM A36 is a structural quality carbon steel for use in welded, bolted or riveted construction of bridges and buildings, and for general structural purposes. Minimum yield strength of 36 KSI (250MPa) is required to meet the requirements of A36. ASTM A36 plate is used in a variety of applications which include, but not limited to; railroad cars, trucks, agriculture equipment, trailers, construction equipment, buildings and bridges

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Mechanical Properties:

  • YP (MPa), min.: 36 (250)
  • Tensile (MPa), min.: 58-80 (400-550)
  • Elongation in 2″ (50mm), min. %: 23
  • Carbon Max % (thickness dependent): .25-.29
View Catalog

A 1011-F HSLAS Gr50/Gr60/Gr80

This specification covers sheet hot-rolled, carbon, structural, high-strength low-alloy with improved formability, and strip, in coils and cut lengths. The addition of alloying elements raises the yield point offering higher strength-to-weight ratios. The product is intended for applications where higher strength, savings in weight, improved formability and weldability are important.

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Mechanical Properties:

YP (MPa), min.Tensile (MPa), min.Elongation in 2" (50mm), min. %
50 (345), 60 (415), 80 (550)60 (410), 70 (480), 90 (620)22, 20, 16
View Catalog

A1018 HSLAS-F Gr50

This specification covers heavy gauge hot-rolled, carbon, structural, high-strength low-alloy with improved formability, and strip, in coils and cut lengths. The product is intended for applications where higher strength, savings in weight, improved formability and weldability are important.

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Mechanical Properties:

YP (MPa), min.Tensile (MPa), min.Elongation in 2" (50mm), min. %
50 (345)60 (410)22
View Catalog

ASTM A572 Gr50/Gr60

A572 is a high strength low alloy steel that offers a higher strength than plain carbon steel plates – plus ductility, weldability, formability, toughness and fatigue strength. A572 meets a minimum strength requirement (dependent on grade) and provides good workability and weldability at a moderate price. A572 plate is used in a variety of applications which include, but not limited to; railroad cars, trucks, trailers, agriculture equipment, construction equipment, buildings and bridges. Charpy V-notch Impact Toughness and Maximum Tensile Strength are supplementary requirements that may be requested.

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Mechanical Properties:

YP (MPa), min.Tensile (MPa), min.Elongation in 2" (50mm), min. %
50 (345), 60 (415)65 (450), 75 (520)21, 18
View Catalog

A656 Gr80

This specification covers high-strength low-alloy, hot rolled structural steel plate for use in truck frames, brackets, crane booms, rail cars, and similar applications. Steels that conform to this specification offer improved formability. These steels are normally furnished in the as-rolled condition.

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Mechanical Properties:

YP (MPa), min.Tensile (MPa), min.Elongation in 2" (50mm), min. %
80 (550)90 (620)15
View Catalog

AR200

AR200 is an as-rolled, carbon-steel plate with a nominal hardness of between 180-235 HBW, intended for moderate wear applications. AR200 is available as cut-to-length plate and discrete plate. AR200 is not intended for structural applications. Typical applications for AR200 steel plate include cement mixer drums and fins, bulk material handling chute liners, skirt board liners, and screw conveyors.

View Catalog

Floor Plate (A786 – CS And A36)

This specification covers carbon, low-alloy, high strength low-alloy, and alloy steel hot-rolled floor plates for flooring, stairways, transportation equipment, and general structural purposes. While it is generally provided in the as-rolled condition, floor plate also may be provided in the heat-treated condition, depending on the material specification. Rolled floor plates have raised figures at regular intervals on one surface of the plate.

View Catalog

A1008 CS Type B

This specification covers cold-rolled, carbon steel sheet, in coils and cut lengths. This material is intended for parts where bending, moderate forming or drawing, and welding may be involved. This specification is not intended for structural use.

View Catalog

Galvanized – A653 – CS Type B

This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hotdip process in coils and cut lengths.

View Catalog

Ready to Talk?

McNeilus Steel has been delivering excellence and dependability along with the finest steel products in the country for more than 70 years.

Request a Quote